Performing a Netgear range extender setupfacilitates you to access a blazing-fast internet connection in every nook and cranny of your home. But, it can be troublesome if the LED light on your Netgear extender starts blinking orange. In that scenario, don’t fret! Walk through the troubleshooting tips mentioned in this post and get the issue resolved in a flash. But, before doing that, let’s discuss the reasons that might have led you to the Netgear extender orange light issue.
Reasons: Netgear Extender Orange Light Issue
- Insufficient power supply.
- Interference of WiFi signals.
- An improper connection between the Netgear range extender and the existing router.
- An outdated firmware.
- Improper Netgear extender setup via the 192.168.1.250 IP address.
So, these were the reasons that might have led you to the Netgear extender orange light issue. Now, without any delay, let’s have a glance at the solutions to fix it.
Solution: Netgear Extender Orange Light Issue
Solution 1: Check if the power outlet using which you have powered up your Netgear range extender is working or not. If it is damaged, consider plugging your WiFi device into another one. Also, make sure that your area doesn’t suffer power outages. If it does, consider using a UPS.
Solution 2: As mentioned earlier, the LED light on your Netgear extender might also blink orange due to the interference of WiFi signals. So, check if your extender is placed near mirrors, fish tanks, baby monitors, cordless phones, microwave ovens, refrigerators, Bluetooth devices, etc. If it is, then change its location right away.
Besides, do not place your Netgear range extender in corners or near thick concrete walls as it might result in dampening of the WiFi signals. Also, place it in the same room as that of the router.
Solution 3: Placing your Netgear extender and router in the same room is not sufficient. It is also necessary to maintain a stable connection between them. To fix the Netgear extender orange light issue, check whether your WiFi devices are connected properly or not.
If you are using a wireless source to connect the extender and router, replace it with a wired one. If you have already connected them via an Ethernet cable, ensure that it is non-damaged.
Solution 4: To get rid of the orange light issue, update the firmware of your extender as soon as possible. This is because the firmware is responsible for the function of hardware elements of your WiFi devices.
In order to get the Netgear extender firmware updated, access the mywifiext page, log in to your WiFi device using the default admin details, and click the Firmware Update option under the Settings menu. Your device will be upgraded to a new firmware version and function smoothly.
Solution 5: Rebooting the Netgear extender is another way of resolving the orange light issue. The reason being, rebooting will fix the minor bugs that might be degrading the functioning of your device.
To reboot your Netgear range extender, disconnect it from the electrical outlet, wait for some time, and then connect it backto the electrical outlet. After rebooting, check if your Netgear extender has returned to its normal working state. If not, walk through the next solution.
Solution 6: Finally, yet importantly, if none of the aforementioned solutions fail to bring you luck, then the issue might be due to an improper configuration of your Netgear extender. In that scenario, you need to set up your extender again. But, before that, restore your WiFi device to factory default settings.
Resetting of the Netgear range extender can be done by pressing the Reset button with the help of a sharp object. Once done, perform new extender setup. Now, the orange light issue will be resolved.
The Ultimate Thoughts
The orange light issue with your Netgear WiFi range extender can be annoying and foil your internet usage experience. So, follow the aforementioned hacks and bring your Netgear extender back to its normal working state.