Can’t See Netgear Orbi Router’s SSID on Network List? Try This!

Millions prefer performing Netgear Orbi router setup to access a flawless internet connection in every nook and cranny of their homes. However, some users have complained that they are unable to see their Netgear Orbi router’s SSID on their network list. If you are also struggling with the same issue, then this write-up will help you a lot. Here, we will provide you with a list of various solutions to get the issue fixed in a matter of minutes. So, read on.

Fixed: Can’t See Orbi Router’s SSID on Network List

  1. Reboot Your Orbi Router

The first and foremost reason why you are unable to see the Netgear Orbi router’s SSID on the network list are technical glitches. These glitches cause a temporary failure to your router. But, you need not worry because you can get rid of them without much effort. To do away with technical glitches, reboot your Orbi router.

Rebooting is the act of switching off and restarting a device. You have to do the same with your Netgear Orbi router. Once done, refresh your network list and see if the router’s SSID shows up. If not, then walk through the next troubleshooting hack.

  1. Keep the WiFi Devices at Safe Distance

Another reason that is not allowing your Netgear Orbi router’s SSID to appear on the network list is an improper distance between the router and modem. So, if your WiFi devices are too close to each other, it is time to separate them. Undoubtedly, the distance between both devices should be close, but not close enough for their WiFi signals to clash.

  1. Update the Firmware

An outdated firmware is also an important factor due to which you are unable to see the router’s SSID on the network list. This is because the firmware is responsible for the hardware as well as the software functionality of the Netgear Orbi router.

To fix the issue, we recommend you perform Netgear Orbi firmware update as soon as possible. You can update the firmware of your Orbi router either by accessing orbilogin.net or using the Orbi app.

  1. Check if SSID Broadcast is Enabled

Chances are that you’ve disabled the SSID broadcast on your Netgear Orbi router that has led you to the issue you are currently facing. So, check whether your router is broadcasting its SSID or not.

For this, access orbilogin.net and log in to your router. As soon as you reach the Netgear Genie setup wizard, click the Wireless option under the Basic tab. Now, see if the Enable SSID Broadcast option is selected or not. If not, select the option and click the Apply button. Thereafter, refresh your network list to verify if the Netgear Orbi router’s SSID becomes visible.

  1. Reset the Netgear Orbi Router

Tried all the aforementioned hacks but are somehow still stuck with the issue? Looks like you haven’t configured your Netgear Orbi router properly. To get rid of the issue, perform the ultimate hack of factory default reset.

To reset your Netgear Orbi router, walk through the below-mentioned instructions:

  • Ensure that your Netgear Orbi router is getting a fluctuation-free power supply.
  • Once assured, start looking for the Reset button on the Orbi router.
  • As soon as the search for the Reset button ends, press it using a pin-like object.

Now, reconfigure your router by accessing the Netgear orbi login page. This time, you will definitely be able to see the Netgear Orbi router’s SSID on the network list.

In Conclusion

Did you get success in seeing the Netgear Orbi router’s SSID on your network list? If yes, then we would like to congratulate you on getting the issue fixed. If you liked reading this article, feel free to leave a word of appreciation in the comment section.

Leave a Reply